Dual Adjustable Pulley CM-330
 
Features
> The multipurpose Dual Adjustable Pulley's dual weight stacks enables two users to workout together or for an individual user to work each arm at different levels of resistance - a great tool for rehabiilitation. Easy adjustments allow for many types of exercise. A great machine for sports specific training, rehabilitation and a tremendous variety of exercises for general conditioning. A must for every type of workout facility.
 
Dimensions
Width - 65 inches
Length - 40 inches
Height - 78 inches
250 lb weight stack
Unit Weight: 700 lb
 
Warranty
Our limited lifetime warranty is the industry’s best with a worry-free pledge that reflects a 40-year commitment to excellence. All Raptor Machines are covered by the following warranty:
Frame and welds - Lifetime Warranty
Guide rods, bushings and pulley wheels - 5 Years
Bearings - 10 Years
Upholstery - 1 Year
 
Specifications
> Cable assembly with swaged steel ball fitting and custom manufactured 5/8-inch retention bolt. This tension adjustment system tested at 500lbs for 5,000,000 cycles to insure reliability.
>   The cable end fitting attached at the handle contains a radial ball bearing that provides independent rotation of the handle to eliminate twisting of the cable. This assembly was tested to 1,000,000 cycles at twice the maximum weight stack load.
> Spring-loaded pull pin assembly conveniently located with 11 vertical positions equaling 150º of adjustment.
>   Arms made from 2-inch x 2-inch x .120 wall tubular steel with a counter-balance system.  This counter-balance feature offsets the  weight of the adjustment arms.  Counter-balance spring assembly tested in excess of 500,000 cycles at full adjustment tension.
> 1-inch machined weight plates with Textured Black electrostatically applied powder coat paint and fitted nylon bushings to insure smooth travel on guide rods.
> Cold rolled solid 1-inch diameter selector shaft-chrome plated for durability and appearance. Machined to bullet tip to insure proper weight stack entry. Machined custom cap plate with fitted nylon bushings insures proper travel of weight plates over guide rods.
> 4 1⁄2-inch & 3 1⁄2-inch Fiberglass™ reinforced pulley wheels with deep
V-grooved channel provide maximum cable contact and bearing rotation. Sealed lifetime ball bearings insure smooth and quiet pulley operation.
> Heavy-duty magnetic pins insure positive locking to weight plates. Tethered to cap plates with thick plastic-coated elastic cable.
> 4-inch x 2-inch & 3-inch x 2-inch x .120 wall tubular steel with Textured Black electrostatically applied powder coat paint.
> Custom molded rubber foot pads insure stability and prevent marring of flooring surfaces.
> 3-stage pre-paint preparatory process that includes a state of the art wash system that paralyzes the material. Then the material is processed through a dryer. The material is then sent through a preheat stage before it has the magnetic paint powder applied. (optional colors)
>   Urethane foam grades are a minimal grading of HR-125 (density pcf of 2.60 plus/minus 0.10 and above in high-compression areas (HR-150 with a density pcf of 4.60 plus/minus 0.30).
>   Cams are computer designed and laser cut to exact shape to allow proper variable resistance throughout the exercises complete range of motion. All Cams are 1/4" thick solid steel. The cams are different for each machine to provide the correct movement for the exercise.
>   Shrouded pulley housing is 6" x 1/4" thick solid steel.
>   Ideal for high volume facilities including Fitness Centers, (large) Personal Training Studios, College/University Recreation Centers, Pro Sports Teams, Country Clubs, Military Recreation and Training Centers, YMCA’s, YWCA’s, Municipalities, Corporate Fitness Centers, Wellness/Hospitals, Rehab/Physical Therapy Clinics, (large or 5 & 4 star) Hotel Fitness Centers or any other commercial facility