| > |
 |
Adjustable
positions on all machines
to accommodate all
users to ensure correct
biomechanical function.
Adjustments are made
with Heavy Duty spring
loaded colored pull-pin
knobs. |
|
| > |
|
Weight
Stacks are adjusted
with a tethered, magnetic
selector pin that extends
through the entire weight
stack. |
|
| > |
|
Cable
system. Cables are
1/4” thick 4800lb
test military spec
galvanized oil impregnated
air craft cable finished
with a tough nylon
coating to 3/16” thick. |
|
| > |
|
Manual
Tension adjusters on
every machine for the
cable adjustments. |
|
| > |
|
Weight
stack plates are solid
steel machined precisely
to with in a _ oz of
weight. |
|
| > |
|
Weight
stack is accessible
from a seated position. |
|
| > |
|
Weight
stacks are enclosed
in Full length Shrouds |
|
| > |
|
Weight
system allows user
to increase by 5lb
increments. |
|
| > |
|
Instructional
guide charts used to
inform correct usage
for each machine along
with anatomical highlights
to show which muscle
groups are being worked. |
|
| > |
|
Each
machine is made with
a lower starting weight
stack and has counter-balanced
arms when needed. |
|
|
| > |
|
Heavy-duty
40 oz. commercial grade
marine naugahyde upholstery
which is 85% mildew
resistant. High density
closed cell foam reinforced
by _” thick plywood
backing for stable
support. |
|
| > |
|
Exceeds
all ASTM requirements. |
|
| > |
|
Guide
rods are 1” CCRO
ANSI 1045, solid steel
hard chrome-plated
with tensile strength
of 75,000psi. |
|
| > |
|
Frames
are constructed of
High Stress 3/16” ASTM
A-500 grade B structural
steel tubing ( 11 gauge).
2” x 4”,
2” x 3” tubing.
2” x 3” tubing
is use on all uprights,
2” x 2” x
1/8” ASTM A-500
grade B structural
carbon steel tubing
(11gauge) is used on
cross members and benches. |
|
| > |
|
All
welds are ground down
and stress tested |
|
| > |
|
3-stage
pre-paint preparatory
process that includes
a state of the art
wash system that paralyzes
the material. Then
the material is processed
through a dryer. The
material is then sent
through a preheat stage
before it has the magnetic
paint powder applied.
(optional colors) |
|
| > |
|
Urethane
foam grades are a minimal
grading of HR-125 (density
pcf of 2.60 plus/minus
0.10 and above in high-compression
areas (HR-150 with
a density pcf of 4.60
plus/minus 0.30). |
|
|
| > |
|
Cams
are computer designed
and laser cut to exact
shape to allow proper
variable resistance
throughout the exercises
complete range of motion.
All Cams are 1/4” thick
solid steel. The cams
are different for each
machine to provide
the correct movement
for the exercise. |
|
| > |
|
Shrouded
pulley housing is 6” x
_” thick solid
steel. |
|
| > |
|
Pulley
Wheels are 4 _” and
6” solid fiberglass
reinforced body with
a 1/2” cable
groove. Oil dipped
double sealed racer
ball bearings with
a _ “ axis shaft
hole. Sealed for moisture
and dust proof. |
|
