 |
8 Way Neck P-8000 |
|
| |
 |
|
|
| > |
|
Self adjusting head pad |
|
| > |
|
All axis of rotation have RED, permanent indication |
|
| > |
|
Start range limitation with numerical indexing, 1-7 |
|
| > |
|
Stop range limitation with alphabetical indexing, A-G |
|
| > |
|
Counter balanced drive arm |
|
| > |
|
75 Lb. Split weight stack with 5 and 10 lb increments |
|
| > |
|
Ergonomically formed and positioned handles with custom made grips |
|
| > |
|
ABS Seat and Back protective dishes |
|
| > |
|
Foot activated seat adjustment fees both hands for vertical adjustment |
|
| > |
|
Easy reach RED, pull knob allows the seat to rotate 365 degrees and lock into 8 positions, every 22 degrees |
|
| > |
|
Custom made rubber feet with bolt down holes |
|
| > |
|
Seamless upholstery will prevent fungus and bacteria from hiding in the seams |
| |
| Dimensions |
|
Width - 44 inches
Length - 44 inches
|
|
| 75 lb weight stack |
|
| Unit Weight: 386
lb |
|
|
| |
| Warranty |
|
| Our limited lifetime warranty is the industry’s
best with a worry-free pledge that reflects a 40-year commitment to excellence.
All Raptor Machines are covered by the following warranty: |
|
| Frame and welds - Lifetime
Warranty |
|
| Guide rods, bushings and
pulley wheels - 5 Years |
|
| Bearings - 10 Years |
|
| Upholstery - 1 Year |
|
| |
| Specifications |
|
| > |
|
Adjustable positions on all machines to accommodate
all users to ensure correct biomechanical function. Adjustments
are made with Heavy Duty spring loaded colored pull-pin knobs. |
|
| > |
|
Weight Stacks are adjusted with a tethered, magnetic
selector pin that extends through the entire weight stack. |
|
| > |
|
Cable system: Cables are 1/4" . thick 4800lb
test military spec galvanized oil impregnated air craft cable finished
with a tough nylon coating to 3/16" . thick. |
|
| > |
|
Manual Tension adjusters on every machine for
the cable adjustments. |
|
| > |
|
Weight stack plates are solid steel machined
precisely to within a 1/4 oz of weight. |
|
| > |
|
Weight stack is accessible from a seated position. |
|
| > |
|
Weight stacks are enclosed in Full Length Shrouds |
|
| > |
|
Weight system allows user to increase resistance by 5lb increments. |
|
| > |
|
Instructional guide charts used to inform correct
usage for each machine along with anatomical highlights to show
which muscle groups are being worked. |
|
| > |
|
Each machine is made with a lower starting weight
stack and has counter-balanced arms when needed. |
|
|
| > |
|
Heavy-duty 40 oz. commercial grade marine naugahyde
upholstery which is 85% mildew resistant. High density closed cell
foam reinforced by 3/4" thick plywood backing for stable support. |
|
| > |
|
Exceeds all ASTM requirements. |
|
| > |
|
Guide rods are 1” CCRO ANSI 1045, solid
steel hard chrome-plated with tensile strength of 75,000psi. |
|
| > |
|
Frames are constructed of High Stress 3/16" . ASTM A-500 grade B structural steel tubing (11 gauge). 2" x 4"., 2" x 3" . tubing. 2" x 3" . tubing is use on all uprights, 2" x 2" x 1/8" . ASTM A-500 grade B structural carbon steel tubing (11 gauge) is used on cross
members and benches. |
|
| > |
|
All welds are ground down and stress tested |
|
| > |
|
3-stage pre-paint preparatory process that includes
a state of the art wash system that paralyzes the material. Then
the material is processed through a dryer. The material is then
sent through a preheat stage before it has the magnetic paint powder
applied. (optional colors) |
|
| > |
|
Urethane foam grades are a minimal grading of
HR-125 (density pcf of 2.60 plus/minus 0.10 and above in high-compression
areas (HR-150 with a density pcf of 4.60 plus/minus 0.30). |
|
|
| > |
|
Cams are computer designed and laser cut to exact
shape to allow proper variable resistance throughout the exercises
complete range of motion. All Cams are 1/4" thick solid steel.
The cams are different for each machine to provide the correct movement
for the exercise. |
|
| > |
|
Shrouded pulley housing is 6" x 1/4" . thick solid steel. |
|
| > |
|
Pulley Wheels are 4 1/2" and 6" solid fiberglass reinforced body with a 1/2" . cable groove. Oil dipped double sealed racer ball bearings with a 1/2" axis shaft hole. Sealed for moisture and dust proof. |
|
|
|
|
 |